Tag Archive for: Energy Audit

“Everyone should have an MREP energy audit! I would not have been able to do my REAP grant without them! Danielle was incredibly helpful in finding ways to save money, and getting maximum rebates to help me improve my energy savings. Not only was she insightful and spot-on with her knowledge of energy efficiency and ways to cut costs, she was fun to work with! She would call me up and say ‘I think I found some more money for you, send me your receipts for that!’ I will certainly continue to refer other friends and business owners to her, so they can find ways to save energy and save money!” – Claire Putnam, MD, Women’s Health Services, Bozeman

Dr. Claire Putnam purchased a building on 7th Ave. in Bozeman and planned to remodel the building into a women’s clinic. The one-story building was built in 1940 for residential purposes and converted into commercial space several years later. It currently has an unfinished basement. The remodel was intended to improve the energy efficiency of the building while creating a comfortable space for the patients. The remodel included new windows, a completely updated HVAC system, all new LED lighting, upgraded insulation, and cosmetic upgrades on the exterior and interior.

Total Savings for the Project

This project will save over 14,000 kWh and 107,000 kBTUs per year. That is the equivalent of saving 1,410 gallons of gasoline! The project is outlined in the table below with each elements’ annual savings, cost, and simple payback. The simple payback uses the current utility rates to calculate the cost savings on an annual basis.

Item Conservation Measure  

Annual kBTU

Savings

(converted)

Annual Cost Savings Projected Cost Simple

Payback

(yrs)*

Potential

Utility

Funding

1. Lighting LED Retrofit 45,788 $586 $1,090 1.09  

$432.00

2. Window Replacement 54,238 $466 $17,434 39.1 N/A
3. Insulation Upgrade 51,885 $511 $4,716 9.23 $920.00
4. HVAC Equipment Upgrade 35,083 $1,610 $15,176 9.43 $461.30
Totals 186,994 $3,173 $38,416 11.5 $1,813

HVAC Equipment

 

The new HVAC system includes an ENERGY STAR-rated furnace and air conditioner manufactured by Trane. The old system consisted of an older furnace (assumed rating at 78% efficiency) and a Bryant 10 SEER outdoor unit for cooling. The new furnace is 97.3% efficient with an electronically commutated motor (ECM) for the blower fan motor and a variable-speed drive (VFD) on the condensing unit. The new outdoor unit for cooling has an SEER of 18.


Window Upgrades

The building contained 31 single-paned operable windows. Twenty-one of the windows were equipped with half a storm pane: half screen on the outside, six windows had full storm panes, and four windows had no storm pane at all. Many of the windows were cracked and the storm panes were not installed properly. This project included a full energy-efficient window replacement.


Old upstairs window.

New Upstairs window.

Old basement window.

New basement window

Insulation Upgrades

The project also included increasing the insulation levels throughout the building. The above-grade walls and attic contained an estimated insulation value of R-11. The blown-in cellulose insulation in the attic was not spread evenly and there was no insulation in the roof structure. The basement exterior walls are concrete only with no insulation.


Basement insulation.

 


Lighting Upgrades
The owner also replaced the halogen track lighting fixtures with new LED flat panel fixtures that are more energy efficient and provide a better quality of light, with a longer service life.

 


Old track lighting.

LED fixture.

 

Energy costs for city and county governments are often a very large budget item. But energy-efficiency upgrades can start at a smaller scale and still result in significant energy savings. One such area is street lighting.

The City of Anaconda would like to upgrade its current street lighting to LED to save energy, lower utility bills, and decrease maintenance. Current street lighting varies from metal halides to high-pressure sodium bulbs at four different sizes and wattages.

The Montana Resource Efficiency Program (MREP) conducted an audit of the current street lights by performing a street-by-street bulb characterization and lamp count. MREP then determined that corn-cobb-style LEDs, similar to the LED shown in the image at right, would be the simplest, most cost-effective retrofit for the City.

To allow for resident comment and to ensure that the light is bright enough and the color is acceptable for the area, MREP advised the City to test several city blocks with the recommended LED lights.

If installed, the project will result in the following savings:

  • LED bulb cost: $49,327
  • Utility incentives: $3,846
  • Annual energy savings: $43,336
  • Simple payback with energy savings: 1.05 years

 

The C Sharps Arms building is located in Big Timber, Montana, and is used to produce custom firearms. The building is divided into two sections, the workshop and the retail/office space. The workshop is the largest section, accounting for approximately 11,100ft2. The building has high ceilings throughout both the workshop and retail spaces, while the offices are standard height with storage above. The basement is used as a packaging area and shooting range to test the company’s products.

Workshop lighting was the main concern for both the management team and the craftsmen. Lighting consisted of (101) 8-foot, two-lamp T12 fluorescent fixtures and (16) 4-foot, two-lamp T12 fixtures. Only 26 of the 8-foot fixtures and nine of the 4-foot fixtures were working or had bulbs. The goal of the management team was to increase lighting in the work areas, while leaving the unused areas dim. There is a second building that had (6) 8-foot fixtures, of which only three were working. The office and retail lighting was also out-of-date, but this was a secondary concern to the workshop. With this type of situation, it was recommended to do a complete replacement of the light fixtures. The table below shows the recommended replacement fixtures.

 

Current Fixture Number of

Fixtures

Current

Wattage

Replacement Fixture Replacement

Wattage

Watts

Saved

Exterior Wall Packs 5 150 LED Wall Packs 30 120
4ft Fluorescent T12 79 80 T8 18W LED Tube 36 44
8ft Fluorescent T12 39 257 LED High Bay Fixture 119 138
CFL Floods 9 26 18W LED Flood 18 8
Halogen MR16 4 50 7.5 Watt LED 7.5 42.5

 

Based on these upgrades, this project was eligible for $7,575 through a utility lighting rebate program.  The rebates dropped the net project cost to $4,407. Annual energy cost savings was $2,391, for a simple payback of less than two years.

 

C Sharps Arms Annual

Bill

Savings

Est. Project

Cost

Est.

Rebate

Net

Cost

KWh

Savings

kW

Savings

Simple

Payback

LED

Conversion

$2,391 $11,982 $7,575 $4,407 18,373 8.9 1.84 years

Even though the building owners continuously upgrade Bozeman Job Service, Montana Resource Efficiency (MREP) auditors located several cost-effective efficiency measures, all with a payback period of a three years or less.

The Bozeman Job Service is a one-story office building located in downtown Bozeman. In 2010, the building owner installed new furnaces, new ductwork, and fluorescent lighting. The MREP audit identified energy-efficiency opportunities for the plug-load, lighting, building envelope, thermostats, and heating, ventilation, and air condition (HVAC) systems.

Energy-efficiency measures found in the HVAC system include installation of compressors and variable-frequency drives to their existing furnaces. The compressors will have an energy-efficiency rating greater than 12, which will result in savings of approximately 2,600 kWh of energy. The variable-frequency drives (VFDs) will accommodate the demand of air flow through the building. This measure would save approximately 1,055 KWH annually. The economics associated with these two measures is:

  • Annual energy savings: 3,655 kWh
  • Projected cost: $841.63
  • Simple payback with energy savings: 2.57 years

The office also has a large plug-load energy use from computers, copiers, printers, and other large office equipment. This building houses 42 computers with monitors that are powered on all hours of the day due to software and/or computer updates from the state. Each computer uses approximately 1.408 kWh per workday and 1.968 kWh per weekend left running. That adds up to almost 21,500 kWh per year. This is almost half of the building’s current usage. There are two options to cut down on this usage:

  • Computers OFF weeknights and ON weekends
    • Annual energy saved: 7,160 kWh
    • Approximate energy bill savings: $574.66
  • Computers ON weeknights and OFF weekends
    • Annual energy saved: 4,300 kWh
    • Approximate energy bill savings: $354.12

Within the office space, the lighting consists of CFLs and fluorescent T8 bulbs. MREP recommended an LED conversion  with the following economics:

  • LED cost: $5,438
  • Utility incentives: $3,135
  • Net cost: $2,303
  • Annual energy savings: 13,974 kWh
  • Simple payback with energy savings: 1.31 years

Additional energy-efficiency measures identified in the audit include weatherizing windows and doors, as well as programmable thermostat setbacks and scheduling.

A lighting-upgrade project is saving a senior living center in Butte significant lighting energy costs, while providing higher-quality lighting for its residents, staff, and visitors.

The Big Sky Senior Living complex consists of one main building and 12 cottages. The main building contains common areas, apartments, offices, kitchens, dining rooms, maintenance areas, parking garages, a memory care unit, a hairdressing shop, and a physical therapy center.

The Montana Resource Efficiency Program (MREP) performed a detailed energy audit for Big Sky Senior Living, selected the LED lighting, facilitated both the purchase of the lighting and the utility rebate process. Lighting at the complex ranged from metal halide bulbs in parking garage and exterior fixtures, to incandescent, halogen, and fluorescent lights in the interior fixtures. The new LED lighting is more energy-efficient and will provide a better quality of light, with a longer service life.

  • LED Cost:$28,312
  • Recycling Cost: $3,627
  • Utility Incentives: $20,720
  • Net Cost: $11,219
  • Annual Bill Savings: $30,000
  • Annual Energy Savings: 232,000 kWh
  • Simple Payback with Energy Savings: Less than 6 months

Prior to the lighting conversion, Big Sky Senior Living used 731,612 kWh annually at a cost of $73,808, and 13,118 therms of natural gas annually at a cost of $9,038. As a day of service, a group of 15 Energy Corps volunteers and MREP engineers performed the complex-wide light bulb change-out and assisted in packing the 4,300 bulbs for recycling.

Future energy-efficiency potential at the complex includes boiler and hot-water pipe insulation; installing variable frequency drives (VFD) on fan motors of air-handling units, rooftop units, energy-recovery units, make-up air units, condensers, unit heaters, and AC units; installing variable frequency drives (VFD) on the pumps in the hydronic heating systems; installing energy-efficient air-conditioning units; and installing an energy-efficient air-condensing unit for the walk-in cooler and freezer.

 LED Conversion per Fixture Type

Current Fixture Number of Bulbs Current Wattage Replacement Fixture Replacement Wattage Watts Saved
Parking Garage Lights 26 458 150-Watt LED 150 308
Parking Lot, Exterior, and Street Lighting 47 128 64-Watt LED 64 36
Fluorescent Tubes 1914 32 15-Watt LED 15 15
Incandescent 1703 60 9-Watt LED 9 51
Heat Lamps 300 100 9-Watt LED 9 91
Wall Packs 13 70 LED Wall Pack 12 58
Candelabra Bulb 29 28 5-Watt LED Candelabra 5 23
Vanity Bulbs 88 25 2.5-Watt LED 2.5 22
Halogen BR30 75 75 8-Watt LED 8 67
Halogen BR40 75 120 17-Watt LED 17 103

 

The Best Western Heritage Inn in Great Falls, Montana, is one of the city’s largest hotels. Built in 1972, the hotel is two stories tall with 230 guest rooms, including four two-room suites and five one-room suites. The building also houses a steakhouse, casino, pool, hot tub, bar, fitness center, and 12 large conference rooms in a convention center.

LED Lighting Conversion

Lighting at the Heritage Inn included metal halide bulbs in the parking lot and incandescent, CFL, and fluorescent lights throughout the interior. Based upon the information in the audit, MREP facilitated an LED conversion project. This project had a less than one year payback:

  • Project costs (lights were self-installed): $2,600
  • Utility incentives: $1,482
  • Net costs: $1,118
  • Annual bill savings: $1,995
  • Annual energy savings: 25,935
  • Simple payback with energy savings: 0.56 years

Additional Recommendations in the MREP Audit Report

In addition to the LED conversion, MREP also recommended occupancy sensors for guest rooms and public areas, such as the fitness center, business center, and offices. These sensors could help save as much as 40% more energy by turning lights off in unoccupied spaces. Several occupancy sensor options are available for hotels, including a technology that involves sensors in the key readers. A standard sensor wall switch can cost as little as $10.00 per switch.

Interior Room Heating

The 76 interior rooms and hallways have 10 dedicated electric roof-top ventilators. These ventilators are direct expansion (DX) cooling only, with no heat. Each room is equipped with its own thermostat tied to a duct-mounted electric heater. This allows each guest to adjust the temperature according to their comfort levels. The supply air to these heaters is not preheated and it takes a large amount of energy to heat air when there is a large temperature difference. It would be beneficial to replace the current roof-top units with a gas-fired model. MREP recommended this upgrade only if and when the current roof-top units are replaced or upgraded. The gas-fired roof top units will preheat the air and use a less-expensive fuel. They will also lower the electricity required by the smaller duct-mounted heaters.

Hot Water Heating

Hot water for the entire building, including the pool and hot tub, is heated by three gas water heaters. The main hot water heater for the guest rooms operates at 79% efficiency. By installing a new high-efficiency hot water heater Heritage Inn would save 5,000 therms of energy or $3,500 per year. The cost of a new high-efficiency water heater ranges between $1,500 to $3,000, resulting in a simple payback for this energy conservation measure of three to five years.